Bulk Contrast Bumper Plates
$778 $1,375 & FREE Shipping
You save: $597 (43%)
By: Fringe Sport
Whether you are buying bumper plates for your garage gym or a box, you can save when you buy bumpers in bulk. You pick what bumpers you need, 500lbs of 10lb pairs or mix & match weights. Please fill out the "Notes to FringeSport" section in the cart with the weights you would like once in the cart section. Need something in-between or more than the options we have? Give us a call at (512) 201-4404 and we can get you what you need.
We have taken our amazing contrast black bumper plates and made it easier for you to tell the difference between your weights. With the color lettering on both sides it takes a simple glance to know what size bumper plate you are picking up. Our Fringe Sport contrast bumper plates are manufactured to go toe to toe with any bumper plate on the market. They are constructed with virgin rubber formulated specifically for its durability, density and low bounce. Most importantly, they go through the most customer-focused manufacturing, quality control and shipping process in the industry so you can rest assured that you are getting the highest quality plates and we are taking the utmost care to ensure they arrive to you in pristine condition!
Not all bumpers are created equal. Here's why your next bumper plates should be Fringe Sport bumpers:
Bumper plates come in a few standard sizes, and are sold in pounds but kilogram conversions are also included on the labeling. Fringe Sport economy bumpers are sold by the pound. Here is a chart with rough pound and kilogram weights:
|Bumper Weight||Best Weight For:|
|10 lbs ~ 5 kg||Great for teaching or learning Olympic lifts|
|15 lbs ~ 7 kg||Same uses as the 10s, but this offers greater durability at only a slightly heavier weight|
|25 lbs ~ 11 kg||A very popular weight as they are very durable and throwing these on an Oly bar gives you 95 pounds (Fran Rx)|
|35 lbs ~ 16 kg||A great size for adding more weight on the bar|
|45 lbs ~ 20 kg||The most popular size for gyms - 45's really let you load up your bar and make some serious strength gains|
|55 lbs ~ 25 kg||When the 45s just don't cut it, we have 55lb bumpers to add some serious weight to the bar.|
A bumper plate is a weight plate for Olympic bars that is made almost entirely of rubber (with a steel or brass collar in the middle that accepts an Olympic bar).
The "end state" of the Olympic lifts is overhead or at the shoulder. Many lifters drop the weights from overhead. Since bumper plates are almost entirely rubber, being dumped from the shoulder or overhead will not damage the weights, bar, floor, bystanders, the lifter, etc...
Bumper plates are also great for garage gym use- the rubber construction is much quieter than traditional metal construction.
How wide are these bumpers?
55's are 3.25", 45's are 2.9", 35's are 2.35", 25's are 1.87", 15's are 1.2", and the 10's are 1.05".
What is the durometer reading on these bumpers?
The 10 and 15 pound bumper plates are 90 shA; the 23,35,45, and 55 pound bumpers are 85 shA
What does durometer mean?
Durometer is a measure of hardness of a material. It ranges from 0-100, and the higher the rating the harder the material, and the higher the material's resistance to indentation. Anything above 65 is acceptable for bumper plates. Our plates are considered to be excellent.
Why do different weight bumper plates have different durometer readings?
In general, the lighter bumper plates have a higher durometer reading because they need to be more rigid to withstand the stress of being dropped. Heavier plates have more surface area to distribute the stress, so they do not need to be as hard.
What is the diameter of these bumpers?
What? Why are the ten pound bumpers narrower than all the rest?
My bumpers smell. Do you carry bumpers that don't smell?
Sometimes the bumpers smell due to the way that they are made. It isn't permanent. The best remedy is to let them air out in the sun for about 5 days.
My bumpers are greasy? How can I get the grease off?
The bumpers are greased as a part of the manufacturing process. Sometimes the factory doesn't clean the plates well enough. Here's what we do to de-grease these bad boys:
We wash the bumpers about 3 times, with paper towels, soap, and water. If that doesn't work, then we use a de-greaser spray that can be purchased at a local home improvement store.
Can I drop the 10 pound bumpers like I see my favorite athletes do?