Bumper Plates and Bumper Plate Sets

    Filter
      27 products
      Extremely durable bumper plates and bumper plate sets for Olympic Weightlifting, Powerlifting, and Functional Fitness Training. Black Bumper Plates, Savage Bumper Plates & sets, Milspec bumpers & sets, and of course, Color Competition Plates.
      In short, bumper plates are weights that are designed so that you can drop a barbell loaded with plates directly onto the ground. If you did this with iron plates, you would risk damaging the ground, your barbell, and the plates themselves. With rubber bumper weights and plates, the bar and plates will bounce harmlessly, and not damage your equipment.
      Since so many movements in CrossFit, Olympic Weightlifting, and Power Lifting involve getting the bar to the shoulders or overhead, many gyms (boxes) are outfitting mostly with bumper plates - and as the old saying goes, a ton of bricks weighs the same as a ton of feathers. There is no penalty for using rubber bumper plates instead of iron for squats or curls.
      It's no secret that ours is a social media world. But there are actually benefits to squatting with bumper plates. First, if those are the weights you have, there are no other options. Second, bumper plates allow you to safely squat without a spotter. If you are using proper squat form, when you fail on a back squat, you will simply sink down to an butt to grass position. At this point, you shrug your shoulders, throwing the barbell and bumper plates backwards and your body forwards. Presto, saved!
      Fair enough. But one of the major complaints about bumper plates in the past was cost - and now bumpers are much more affordable. So you had to really spend a lot of money to outfit a gym with bumpers previously - and now you can do it on a budget.
      They are constructed with virgin rubber formulated specifically for its durability, density and low bounce. Most importantly, they go through the most customer-focused manufacturing, quality control and shipping process in the industry. Our Fringe Sport bumper plates are manufactured to go toe to toe with any bumper plate on the market. You can rest assured that you are getting the highest quality plates and we are taking the utmost care to ensure they arrive to you in pristine condition! Kilo and pound conversion are displayed on each plate.
      The Milspec bumper plates are designed to the exacting tolerances and high durability requirements of the US Army. These bumper plates are used every day by soldiers training for and completing the ACFT- the Army Combat Fitness Test. They are also made of virgin rubber.
      Tech plates are the predecessors to bumper plates. Before the technology and engineering existed to make high quality (light) weight plates from rubber (bumper plates), tech plates were the answer to hold a barbell at proper IWF height to start your first pull for the clean or snatch (or the deadlift for that matter). So, tech plates are weight plates constructed of plastic that have a 17-18" diameter. Sometimes, there is a bit of a variation between brands. They typically are not made in weights higher than 25lb / 10kg. In fact, we have never been asked for tech plates in weights higher than 10lb / 5kg. While they absorb the impact of a drop, they don't bounce like bumpers do- and they tend to be loud on the drop. Durability of tech plates is a strong point, but don't believe anyone who claims they're unbreakable. I've seen them break, although it takes quite a few thousand drops.
      If you want to load a bar as light as possible, but still have a lifter start their pull from the correct height, use 5# tech plates. In every other situation, use bumper plates. Tech plates are more expensive than bumpers, they are louder when the bar is dropped, and with today's top notch bumper plates (ahem, OneFitWonder), the durability gap is way smaller than before.
      A bumper plate is a weight plate for Olympic bars that is made almost entirely of rubber (with a steel or brass collar in the middle that accepts an Olympic bar).
      The "end state" of the Olympic lifts is overhead or at the shoulder. Many lifters drop the weights from overhead. Since bumper plates are almost entirely rubber, being dumped from the shoulder or overhead will not damage the weights, bar, floor, bystanders, the lifter, etc... Bumper plates are also great for garage gym use- the rubber construction is much quieter than traditional metal construction.
      Durometer is a measure of hardness of a material. It ranges from 0-100, and the higher the rating the harder the material, and the higher the material's resistance to indentation. Anything above 65 is acceptable for bumper plates. Our plates are considered to be excellent.
      In general, the lighter bumper plates have a higher durometer reading because they need to be more rigid to withstand the stress of being dropped. Heavier plates have more surface area to distribute the stress, so they do not need to be as hard.
      The ten pound bumper plates are purposefully 5mm narrower than the other bumper plates so that when you have 10's loaded on the bar, plus other bumpers, the 10 pound plates impact the ground a split second later than the other bumpers. Since the 10 pound plates have the least surface area and are thus the weakest bumpers, this saves stress on your 10 pounders!
      Crumb bumper plates are made from recycled tires and steel inserts, for a bumper plate that can withstand tons of punishment. Recycled crumb bumpers are constructed using a thick, less dense mix of rubber. This rubber mix results in a bumper that is a bit wider. This additional width, plus the forgiving low density of the rubber mix, results in a high bounce bumper that resists cracking or "taco-ing".
      Polyurethane bumpers are compositionally built differently. They are man-made and have different chemical properties than our Virgin Rubber bumpers. Think of them as a test tube creation compared to our virgin rubber plates made from natural sources like trees and plants. The urethane is a much harder compound. They will be more durable but more expensive at the same time.
      Sometimes the bumpers smell due to the way that they are made. It isn't permanent. The best remedy is to let them air out in the sun for about 5 days.
      The bumpers are greased as a part of the manufacturing process. Sometimes the factory doesn't clean the plates well enough. Here's what we do to de-grease these bad boys: We wash the bumpers about 3 times, with paper towels, soap, and water. If that doesn't work, then we use a de-greaser spray that can be purchased at a local home improvement store.
      Drop away. We are confident that our 10 pound bumper plates can handle the abuse, and they are backed by our fully comprehensive warranty for 1 year just in case.

      BUMPER PLATES: WHAT ARE THEY, AND WHY DO YOU NEED THEM IN YOUR GARAGE GYM?

      durable bumper plate cross-section with steel hook

      FRINGE SPORT BUMPER PLATES ARE THE MOST DURABLE PLATES ON THE MARKET

      Our bumper plates feature extremely durable, low bounce rubber that surrounds the iron in the middle of the plate, and a metal insert that attaches to the ring of the bumper plate. These hooks provide extra surface area to bond the rubber to the steel, creating a much more long-lasting and hardcore bumper plate that’s less likely to break or bend overtime.
      They’re for the beginner, the expert, and everyone of every level in between. Our bumper plates were designed with the garage-gymmer, CrossFit box, and community gyms in mind. No matter the kind of fitness you’re doing, these bumper plates are durable and will remain intact. They’re meant to be lifted, slammed, dropped, and beaten on in your pursuit of strength in the Garage Gym Revolution.Durability is important to us, because it means a high-quality bumper plate for you and your lifting. We’ve taken the time to specially design our bumper plates with 100% virgin rubber for a low, dead bounce for your safety and the safety of those (and the walls) around you. This means that when dropped, even from overhead, you won’t be chasing your barbell down the street. It’ll remain in front of you, where it was dropped. Our bumper plates can be dropped from any height time and time again.Our bumper plates feature a beveled edge for easier grip when transporting them from storage to your barbell, and because they’re 100% virgin rubber, they won’t break or bounce very far if dropped. 


      Brands of Bumper Plates

      Buy from our selection of incredibly durable bumper plates for CrossFit, Olympic weightlifting, Powerlifting, and the Garage Gym lifter. Durable long lasting bumper plate sets here.

      • Fringe Sport Competition Plates: Level up your bumper plate game with the our Competition Plates. They are available in kilos and pounds. We wanted durable, affordable Olympic bumper plates for training, and that's exactly what these are.
      • Fringe Sport American-Made Bumpers: These bumper plates are made in America from recycled rubber. They are a step above your average plate. Their durability is tested in Decatur, AL, going through 30,000 drops during a regular drop test. If you are looking for a recycled rubber plate, this is one that will not disappoint.
      • VTX: Troy VTX econ bumpers are considered some of the best in the industry- combining great quality bumpers with an unbeatable price. On top of that, a 1 year warranty against breakage gives each user peace of mind. Pair that high quality manufacturing with Fringe Sport's unbeatable service, and you get a one of a kind deal. Don't be fooled by the low price- these VTX bumper plates are used by affiliates throughout the US- and they are known for their high quality, low bounce, and outstanding durability. A great alternative are the Milspec bumper plates.
      • Hi-Temp: Hi Temp bumpers are constructed using a thick, less dense mix of rubber than many other bumper brands. This rubber mix results in a bumper that is a bit wider than many other brands. This additional width, combined with the forgiving low density of the rubber mix, results in a high-bounce bumper that resists cracking or "taco-ing".

      WHAT TO LOOK FOR IN BUMPER PLATES

      • Dead Bounce Bumper plates were meant to be dropped, in some cases (particularly after a PR) possibly even slammed. The rubber consistency of bumper plates is designed to withstand making forceful contact with the ground, but at different levels and in different ways. Dead-bounce bumper plates describe exactly what it sounds like, very little to no bounce off of the floor after being dropped. This is important because the less bouncing your plates do, the less bouncing your barbell will do, which will save your barbell collars and the center rings of the bumper plates from getting loose.
      • Center Ring The center rings on the bumper plate (what you slide your barbell collar through), can vary from manufacturer to manufacturer as far as the amount of indentation they have compared to the rest of the plate (some bumper plates have rings that are flush with the plate which results in metal on metal contact when loading multiple plates and expedites the wear and tear process, while others are flanged to prevent metal on metal contact as well as make it easier to load the plates on the bar.) The way the rings are set into the plate can also differ which can be a determining factor in the life expectancy of the plate. When the rings become loose and fall out from multiple impacts with the ground and/or rattling on the barbell, the plate is pretty much dead as there is now way to set the rings back in. You want to find a bumper plate that has not only properly flanged center rings, but also a manufacturing process that sets the rings into the rubber plates as best as possible (which can be done with using rebar, glues, and several types of different bonding rubbers).
      • Thickness The nice thing about metal plates is that you can load hundreds of pounds on each side without worrying about running out of room. The story is the complete opposite with most bumper plates. Since bumpers have to be able to withstand impact with the floor, and because they are made out of rubber, they are naturally thicker and take up more surface area on the bar, resulting in less loadable weight. Still, some manufacturers take this into account and purposefully make their heavier plates with the least amount of surface area possible to allow for more weight on the bar. With lighter plates you want to actually look for more surface area (especially on 10 and 15lb bumpers) to insure that they won’t “taco” or fold over when dropped.

      Why Invest in Color Bumper Plates

      • Training to Compete There is something to be said for practicing like you play, and in that sense when you lift on colored bumpers you feel like a real weightlifter and in some way it gives you even more purpose during training.
      • Knowing Weight Conversions Knowing weight conversions of plates via colors is invaluable when training with other weightlifters at different gyms or in training halls at competitions. Especially if you are training primarily at a CrossFit box where everything is in pounds, if you can use colored bumpers then at least you will know that when you grab a blue bumper plate, whether its 45lbs or 20kgs, the weight will be about the same.
      • Look Like a Badass / Feel Like a Badass Colored plates look cool. When you watch any of the top lifters at national or world meets, or bigger CrossFit events - everyone is lifting or working out on colored bumpers. Kind of like wearing the same shoes as your favorite athletes, training on colored bumper plates brings you one step closer to being and feeling elite.

      why invest in color bumper plates

      what are technique plates

      Related Blog Articles

      WHAT ARE COMPETITION BUMPER PLATES AND HOW DO THEY DIFFER FROM NORMAL BUMPERS?

      Competition bumper plates are actually some of the oldest types of bumper plates. Originally bumper plates were developed for Olympic Weightlifters to compete in local, national, and yes, international competitions like the Olympics. This is the origin of the name- Olympic Weightlifting. When an Olympic Weightlifter executes a lift, the end of the lift is above the Weightlifter's head. From there, the barbell and the weights need to return to the ground. For heavy lifts, it can be dangerous to lower the weight to the ground manually, and it also "wastes" the Weightlifter's energy. Remember, we are talking about competitions here- there is no prize for "most gracefully returning the weight to the ground after a successful lift." So in the early days of Olympic Weightlifting, several solutions were attempted to try and solve this problem. The winning solution was to create competition bumper plates- plates that were made of steel and rubber and were designed to be dropped from overheard. Initially, these competition bumper plates were created in only 10kg, 15hg, 20kg, and 25kg sizes. The lighter weight plates were not durable enough and more traditional style weight plates were used for these lighter weights. As Olympic Weightlifting became more common in the US, many companies began creating these competition bumper plates in pound szies as well as the traditional kilogram sizes.

      DOES FRINGE SPORT CARRY THE CHEAPEST BUMPER PLATES?

      We carry the cheapest bumper plates that you would want to buy.

      In other words, if you look hard, you can probably find cheaper bumper plates... but then you've got to lift with them. We've been in business over a decade, and in that time, we've made our reputation on having the best, most durable bumper plates in the world.

      But aren't all bumper plates the same? They sure look pretty similar!

      All bumper plates are NOT the same. That's kind of like saying that a Hyundai and a Ferrari are the same- since they are both cars and you can order them each in red.

      In the same way, even though many bumper plates LOOK the same, what's inside is different.

      Let's start with the rubber. We use pure, innocent, virgin rubber for all of our bumper plates. What this means is:

      • Our plates don't stink, and
      • Because we precisely control the rubber that goes into the plates, the end result is the most durable, bumper plate with a weight that precisely matches what it is supposed to. Did you know that some brands have weights that are off by as much as 3 pounds for a 45 pound plate? Imagine squatting and one plate weighs 42 pounds while the plate on the other side of the bar weighs 48 pounds. You'd be pretty lopsided, and it could even be dangerous.

      So if you're looking for cheap bumper plates, look no further than Fringe Sport. Because if you're looking for a "great deal on a piece of crap," well, we're not your supplier. That's why Fringe Sport is the best place to buy bumper plates. And if you're looking for bumper plates near me- great news! We ship all over the lower 48 United States.

      What is the difference between bumper plates & metal plates?

      The main difference between bumper plates and metal weight plates is the material they are made from. Bumper plates are usually constructed from a rubber or synthetic material, while weight plates are typically made from cast iron. This difference in material creates a few key distinctions in how each plate can be used.

      Bumper plates are designed for Olympic-style lifting, such as clean and jerk or snatch lifts. The soft material helps protect the barbell and floor from damaging drops that would occur if metal weight plates were used. Additionally, their more pliable design helps them absorb some shock when tossed about and dropped during a workout, which makes them safer for users to use with heavier weights.