Frequently Bought Together
+
+
Total Price:
+
+
💬 Ask Gymbo the AI
Frequently Bought Together
+
+
Total Price:
Let's Face It - You Can Never Have Enough Storage.
When space is at a premium in your garage, and you have bumper plates tucked in every corner, you need new storage ideas.
And that's what we have for you here at Fringe Sport - Bumper Plate Weight Storage Pegs.
Built to fit on most any rack or cage, with the right specs, the attaching pins on these super sturdy pegs are 1" - or 24.5mm - so they fit on any 3x3 rack or cage by Fringe - or Fringe's Frenemies with those measurements.
These deceptive looking storage pins come in 2 sizes - 12.5 inches and 6.5 inches. And you can load up THE ENTIRE LENGTH! These compact pins can go up and down your 3x3 cage or rack like stair steps.
And the weight capacity? You won't believe it. The 12.5" pin can hold a max capacity of 360 pounds, while the 6.5" one holds 180 pounds. AMAZING!
The diameter of the pin is 48mm - so it can hold any of your metal or rubber plates!
These powder coated steel pins fit the holes in a 3x3 cage or rack with a bolt to hold them on tighter than a dog holding on to a steak bone! So you can stack your plates without a worry.
Oh - and did we mention - under the bottom of the very end of the peg? Yep - you guessed it - it's a bottle opener! So you can have that fridge in the garage stocked with your favorite bee.....ummmm soda......ummm WATER and quench your thirst in a hurry!
Grab one (or a dozen) of these fantastic storage solutions for your 3x3 rack or cage - your gym floor - and your bumper plates - will thank you!
Powder coated heavy gauge steel
to hold the plates in a large stack.
Mounting includes needed hardware!
Pin Size of 1 inch
or 24.5mm to fit our 3x3 racks or cage - or anyone else's that you like (or don't like).
Two Sizes
12.5 inches and 6.5 inches.
Diameter
48 mm to hold any size plates!
Weight Capacity
of 360 pounds max capacity for the large pin and 180 pounds of the small pin.
Entire pin is loadable
you can stack the plates all the way to the end!
Warranty
Fringe Sport's Fantastic One Year Warranty.
Product ID
7768
You can buy these weight pegs as a single peg or a pair of pegs. Check out the list of choices at the top of the page!
M
I got these for my Rep rack because Rep's were out of stock. That turned out to be a very good thing, because I think these are much better than the standard pegs that use two bolts and cover 4 holes. For those, the bolt heads make some usable space unavailable, also, Fringes single bolt design makes it much more flexible with placement on the uprights. They are totally solid - no wiggle or anything. If you need weight horns, these are the one's to get.
S
Great pegs. Solid. I have 8x45lbs plates on the one peg and it’s holding strong.
A
Just what I needed
A
Great quality like everything Fringe sells!
A
Great quality like everything Fringe sells!
L
Clean, and pristine. Great packaging as well. Exactly what I was looking for
L
Clean, and pristine. Great packaging as well. Exactly what I was looking for
A
Works as intended! I appreciated Fringe Sport's attention to detail as I ordered 2 sets of 2 pegs at 50% off and was worried they would mess it up by only including one pair, but they got it right.
M
Great weight horn!
M
Great weight horn!
M
Great weight horn!
C
Great product, super easy to install
C
Great product, super easy to install
J
These are hands down my favorite rack storage pegs. No nonsense, reasonably priced, and I like the 6.5" length for my thin plates. My only complaint is that they don't come with (or offer) a rubber bushing/spacer to hold the plates off the rack upright. This is not only necessary to keep your plates from hitting other bolts on an upright, but the weight stack on a Dane 2.0 will hit your plates without a 1" space between the upright and the plate.
Reached out to cx email
J
Easy to put together. Fit 3 full size bumpers easy
J
Easy to put together. Fit 3 full size bumpers easy
S
Just what I needed to store my plates and weigh down my squat rack! Great service and fast delivery.
S
Just what I needed to store my plates and weigh down my squat rack! Great service and fast delivery.
C
Hardware is very impressive, over kill. And i love that.
C
Hardware is very impressive, over kill. And i love that.
J
Like the previous person said they need to include a spacer for dane 2.0 model
Sorry to hear about your experience. We’ve reached out through email to offer further assistance. Kindly check your inbox and please feel free to reply there so we can help address your concern.
J
Like the previous person said they need to include a spacer for dane 2.0 model
Sorry to hear about your experience. We’ve reached out through email to offer further assistance. Kindly check your inbox and please feel free to reply there so we can help address your concern.
S
Perfect for slim plates like 5s and 10s. Quick and easy 10/10
S
Great product, smooth edges, bolted through the rack so it doest take up unnecessary holes. 10/10
S
Perfect for slim plates like 5s and 10s. Quick and easy 10/10
S
Great product, smooth edges, bolted through the rack so it doest take up unnecessary holes. 10/10
J
Bought for my ROGUE RM-3. Fits perfect. Threw a 45lb, 35lb, and 25lb plate on each one from Barbell standard. Could fit a coupe more small plates. Highly recommend.
J
Work good and are strudy.
J
Work good and are strudy.
M
Have to purchase rubber bushings, to keep plates from hitting my new frame.
M
Have to purchase rubber bushings, to keep plates from hitting my new frame.
A
They sag to far. I do not feel confident in the quality of these weight horns.
reached out through email
C
Great product and consumer service is top notch.
Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/
