Frequently Bought Together
+
+
Total Price:
+
+
💬 Ask Gymbo the AI
Frequently Bought Together
+
+
Total Price:
"Clean up, Clean up, Everybody, Everywhere...."
(you're welcome - we know you'll sing that all day!)
Have you ever tripped over a barbell you thought you had put down one place, but it decided to roll to another?
Have you turned the air blue after you stubbed a toe on a bar that wasn't out of the way enough for you to walk?
How frustrating it is to walk into your garage gym and have to walk an obstacle course around the bars?
That's why, at Fringe Sport, we hear the cries and cussin' and came out with the perfect storage solution.
The 3x3 barbell holders attach directly to your squat cage! How perfect is that?
Made for 3x3 uprights with 1 inch holes, these holders, in either vertical or horizontal attachment styles, can fit right on to the bottom of the rack. You can put it anywhere that you have open holes and voila - your bar is up off the floor, and stored in a handy place to grab it when you're ready to squat!
The inside of the holder has a plastic liner to protect your barbell as you slide it in and out - we want to keep it shiny while you store it!
This super cool storage accessory fits any Olympic barbell and gets it up and out of the way, safe from toes, shins and NSFW words that might accidentally fly out of your mouth!
Grab one for your rack today and make your garage gym a safer place to be!
3x3 Fringe Sport Vertical or Horizontal Barbell Holder Storage
Horizontal
- Material: Super sturdy black powder coated steel to handle any size barbell
- Plastic liner inside the bar holder to keep the bar safe.
- Easy to mount with large hole and slot and will attach to any 3x3 rack on the market with 1 inch holes.
- All hardware for mounting included!
- Back attachment includes hole and slot feature so it can attach to any size rack, any hole, any width!
- Protects your bar with plastic liner in the holder.
- Mounting plate measurement: 8.25" x 2.7" wide
- Weight: 7.5 pounds.
- Barbell cylinder holder length: 7.67 inches
- Warranty: Fringe's Fantastic One Year Warranty
Vertical
- Material: Super sturdy black powder coated steel to handle any size barbell
- Easy to mount with large hole and slot and will attach to any 3x3 rack on the market with 1 inch holes.
- All hardware for mounting included!
- Protects your bar with plastic liner in the holde!
- Mounting plate measurement: 8.25" x 2.7" wide
- Weight: 7.5 pounds.
- Barbell cylinder holder length: 7.67 inches
- Warranty: Fringe's Fantastic One Year Warranty
D
Great addition to the Dane 2.0 in my cramped office gym. I didn’t want to risk banging up the walls while manipulating barbells and this fit the bill perfectly.
I did have to modify it slightly to fit directly behind the weight stack, spending a few minutes with an angle grinder and belt sander to shorten the mounting plate slightly to fit between the bolts that hold the bottom of the weight stack rods in place.
G
It is what it is. I am using it on a storage upright with a foot to store an open trap bar which are notoriously hard to store.
n
This was my 1st and 2nd order from Fringe. I got a couple vertical barbell holders, mag pins, plate storage pegs, and the dip attachment. Beyond impressed with the equipment, especially the dip attachment which fit my 3x3 rack perfectly with zero wobble. The packaging was top notch, shipping was prompt and free, just a perfect order all around. Definitely would reccomend if you're looking for great gear at lower prices. I'll be getting some more stuff from Fringe in the near future.
n
This was my 1st and 2nd order from Fringe. I got a couple vertical barbell holders, mag pins, plate storage pegs, and the dip attachment. Beyond impressed with the equipment, especially the dip attachment which fit my 3x3 rack perfectly with zero wobble. The packaging was top notch, shipping was prompt and free, just a perfect order all around. Definitely would reccomend if you're looking for great gear at lower prices. I'll be getting some more stuff from Fringe in the near future.
A
Perfect fit on my REP PR-5000
J
It does exactly what it was advertised to. I should have measured first however because my bar can barely make it into the mount without putting a hole in my ceiling… on the bright side it does hold my rogue post landmine pretty well!
n
This was my 1st and 2nd order from Fringe. I got a couple vertical barbell holders, mag pins, plate storage pegs, and the dip attachment. Beyond impressed with the equipment, especially the dip attachment which fit my 3x3 rack perfectly with zero wobble. The packaging was top notch, shipping was prompt and free, just a perfect order all around. Definitely would reccomend if you're looking for great gear at lower prices. I'll be getting some more stuff from Fringe in the near future.
J
Needed more floor space and this fit the bill perfectly. One the Dane 2.0, if your placing it below the weight stack, you will need 6-8 extra washers placed between the main frame and the 3x3 plate so that it clears pully and weight stack bolts. Very simple to do. Solid piece, recommended!
P
Great attachment. Delivery took only took two days.
P
Great attachment. Delivery took only took two days.
A
After watching the video on how to install under the weight stack, I got it on and it works great!
L
Had to look up Fringe’s video about the best way to fit this into the Dane 2.0 since the weight stack guide bar lower brackets sort of get in the way of where it can be installed. It’s an easy fix though just adding a couple of washers on the bolt when attaching it, and it works well.
S
Great gear! My third gym set up, and this is the best piece i have had. Thank you!
S
Great gear! My third gym set up, and this is the best piece i have had. Thank you!
M
I placed the vertical barbell holder by the stack weights and works wonderfully. I had pegs on the back to hold my weights and no room on the front because of the pulley. The horizontal barbell holder would not work for my set up, but the vertical worked perfectly. Now I have somewhere to place my barbell. Thanks.
M
I placed the vertical barbell holder by the stack weights and works wonderfully. I had pegs on the back to hold my weights and no room on the front because of the pulley. The horizontal barbell holder would not work for my set up, but the vertical worked perfectly. Now I have somewhere to place my barbell. Thanks.
C
Great product and consumer service is top notch.
C
Great product and consumer service is top notch.
D
Exactly what I needed for my Swiss Bar. A little more than I wanted to spend, but heavy duty....and does the job!
J
These work great on my rack. Very easy to install and use. Quality is high and at a lower price than my rack maker. Great space saver. Would recommend this product.
C
It's works and fits but it could have been packaged with a wrench to tighten the bolts.
M
Perfect item for my rack, good value, good product, exactly what I wanted and hoped for
N
This thing is solid.
C
I use this with the Rep squat rack and it works great - just check the hole sizes/spacing and you should be good to go.
F
Perfect fit and super quality finish. Simple accessory that was sorely missing across other sites and overpriced everywhere else that had something similar.
E
Perfect storage , for my extra barbell.
E
Perfect storage , for my extra barbell.
Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/
