Most cable machines demand more than just floor space. They take over your layout, block walkways, and force you to build your gym around them. Walls with doors or tight clearances often get written off entirely.
The Slim Gym changes that entirely.
At just 5" deep, 33" wide per tower, and 80" tall, Slim Gym is the thinnest way to bring true cable training into your space. Its low-profile height makes it easier to fit under standard residential ceilings while delivering serious performance in a footprint slimmer than most storage systems.
Run a single tower for focused cable work. Pair them up to create a functional trainer or crossover station. Add the protruding J-cups and Front Feet to unlock squat rack capability without sacrificing your footprint.
Built with 3x3 uprights and 1" holes, the Slim Gym integrates into our open ecosystem so your setup can evolve as your training grows.
One tower or two. Cable system or rack. Minimal footprint. Maximum capability.
Depth
~5" (9" incl. trolley handle)
Width
33" (with pulleys facing out)
Height
80"
Weight
328lbs
Weight stack
160lbs with a 2:1 ratio
Materials
Steel, aluminum pulleys, UHMW rollers
Finish
Black powder coat, chrome uprights, Warhawk red aluminium pulleys and pins
Warranty
Lifetime against manufacturing defects
Shipping
Freight
Product ID
9455
Thinnest Full Cable Setup
Just 5" deep, 33" wide per tower, and 80" tall, delivering real cable training in spaces bulky machines cannot fit.
Modular Single or Dual Setup
Run a single tower for streamlined cable work or pair them up to build a functional trainer or crossover station without expanding your footprint.
Rack-Ready 3x3 Uprights
Built by 3x3 uprights with 1" holes, compatible with J-cups, Front Feet, and standard rack attachments.
Commercial-Grade Movement
Aluminum pulleys and UHMW roller trolleys deliver smooth, consistent tension at every height.
The mounted depth is about 5". Even with the trolley handle, the total depth is only about 9".
Yes, most accessories that fit 3x3 racks with 1" holes will work on the Slim Gym. You will need to consider the distance from the wall, though. For example, our Mammoth Belt Squat and Dip Station will work.
Absolutely! At just 79" tall, the Slim Gym will fit in most basements.
Yes, with the optional protruding J-cups and front feet. However, the weight capacity will be limited by the wall mount.
No, it is not because the cable feeds in from the side.
No, they are not because the cable feeds in from the side.
Yes but only the horn with the rod.
It will be 79" tall.
The height with the bar totals to 85".
Front Feet are not required for standard cable training. The Slim Gym is rated to support up to 200lbs without them.
If you plan to lift heavier using Protruding J-Cups, we recommend adding Front Feet for enhanced stability. When installed, Slim Gym supports up to 350lbs.
They are designed to increase forward stability and provide a more planted feel as you push your training further.
The rack can be made as wide as 96".
Yes, it has to be mounted on the wall. Preferably to studs at the three mounting points. Wall lags are included with the Slim Gym.
Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/