Wall Ball Target

By: OneFitWonder

OneFitWonder Wall Ball & Medicine Ball Target

Make sure to knock Karen Dead with our wallball target by OneFitWonder. These wall ball targets are the perfect accessory for those with limited wall space. We recently installed them on our display rig at our warehouse for a competition we were holding and we did not have enough wall space. Don't have a rig that is just these wall ball targets are easily mounted to a concrete wall as well. OneFitWonder Wall Ball Targets attach directly to our OneFitWonder 3”x3” rig with the center of the target meeting a 10’ height.

  • Compatible with the OneFitWonder 3" x 3" Rig
  • Weight 18lbs

Hardware Required but Not Included:
You will need to purchase two 1/2"x 5 1/2" Bolts, two 1/2" lock thread nuts and four 1/2" flat washers. Those will attach the target to the upright. There is a bolt provided, at least there should be to connect to target to the post it comes with. The targets we have been using for competition we used two 1/2" x 1 1/2 " bolts with two 1/2" flat washer per bolt and one 1/2" lock thread nut to attach the target to its post, instead the one provided. So I think  a good way to list it on the website

Additional Hardware required

  • Two 1/2" x 5 1/2" Bolts
  • Two 1/2" Lock Nuts
  • Four 1/2" Flat Washers
  • Two 1/2" x 1 1/2" Bolt Optional - Suggested
  • Two 1/2" Lock Nuts Optional - Suggested
  • Four 1/2" Flat Washers Optional - Suggested

Related Items