+
+
The large chrome-plated steel hub at the center of each competition bumper plate isn’t just for looks—it ensures a tight, stable fit on your barbell, reducing plate wobble and wear over time. This design also helps distribute impact more evenly during drops, protecting both the plate and your bar sleeve. The result? Smoother lifts, quieter landings, and equipment that lasts longer, no matter how hard you train.
IWF-standard plates ensure a consistent 450mm diameter, exact color coding, and ultra-tight weight tolerances—the same specs used in international competition. Training with plates that meet these standards helps you develop proper technique, build trust in your equipment, and step onto the platform with zero surprises. If you're serious about competing, lifting with IWF-compliant gear isn't optional—it's essential.
With a weight tolerance of just ±0.05%, these plates offer elite-level precision far beyond standard bumpers—which can be off by up to a full pound. That kind of accuracy matters when you're chasing PRs, fine-tuning technique, or prepping for competition. Every rep is exactly what it says it is, so your training stays consistent & your progress stays measurable.
Our Savage Competition Bumper Plates are designed to meet IWF standards with a precise 450mm diameter and are calibrated to within +/- 0.05% of weight accuracy, so every rep you lift is true to weight. That level of precision matters when you’re chasing PRs or training for competition—especially compared to standard bumpers that can vary by up to a full pound per plate.
What sets these plates apart is their durability and control. Made from dense virgin rubber with a chrome center hub, they’re designed to handle thousands of drops without cracking, warping, or bouncing across the gym. The low, dead-blow bounce protects your bar, your platform, and your shins—making them ideal for tight home gyms or professional setups alike.
Each plate is color-coded to IWF specs for quick identification during fast-paced workouts. Plus, since all plate sizes share the same diameter, your pulling height stays consistent and your lighter plates won’t wear out faster. If you’re looking to invest in long-lasting, competition-grade performance that gives you full confidence in your lifts—these are the plates you want.
Quantity
Sold in pairs or a full set
Weight
25lb, 35lb, 45lb or 55lb
Material
100% Virgin rubber with a steel center hub
Durometer Rating
90 ShA
Width/Thickness
25 lb Green- 32mm/1.25"; 35 lb Yellow- 44mm/1.75"; 45 lb Blue- 55mm/2"; 55 lb Red- 66mm/2.5"
Full Diameter
17.71 inches/450mm
Insert Diameter
1.98 inches/50.4mm (collar opening)
Product ID
8983
Attack your olympic lifts like a savaage
The Mammoth works out of the box with the lever arm and the belt, which comes free. That said, most owners add the Kickstand. It holds the arm up so you start every rep standing instead of picking the weight up off the floor.
That's why we sell it bundled. Pick + Kickstand & Magpin, or go all in with + Kickstand, Dual Mounted Weight Horns & Magpin. Bundling at checkout costs a lot less than adding the pieces later.
We'll be straight with you. Every lever arm moves in an arc, so you feel less than the full weight of the plates loaded. The fix is length, and the Mammoth's lever runs 39" to 48.75", one of the longest you can buy. A longer lever means a flatter arc and less forward pull.
In our recommended setup you feel about 80% of the load, and up to about 90% with the horn moved closer to you. Most lever belt squats top out around 60%. A standalone machine costs $2,000+ and eats floor space. The Mammoth hangs on your rack. See the full felt load breakdown.
Yes, and watch it before you start. It covers the belt squat and the kickstand. The bolts are big, so have a large wrench or socket set handy.
One tip owners have flagged: don't skip the big washer that goes under the weight horn.
It fits 2x2, 2x3, and 3x3 uprights with either 5/8" or 1" holes. Just pick your hole size at checkout. The one thing to check is that your upright has holes on the side, since that's where the Mammoth mounts.
No side holes? The Wall-Mount Accessory gives you a dedicated belt squat station without tying up your rack. And if it still doesn't work out, you're covered by our 365-day no-drama returns.
Wall-Mount Accessory View Yes. The arm has about 10" of length adjustment, the horn moves, and you can mount it at different heights on your rack. Mount height matters most, especially for shorter lifters who need to clear the kickstand. Our mount height guide walks you through it.
Sharing with someone a lot taller or shorter than you? Dial in a setup for each of you, then switch mount height and arm length between users.
The Mammoth is rated to 900lbs, so the frame isn't your limit. Plate space on a single horn is. Add the Dual Mounted Weight Horns for more room, and they double as handles mid-rep.
Worth knowing: dual horns sit farther back, so felt load drops to about 65%. That's great for big numbers, but run the math before you chase a plate count.
Dual Mounted Weight Horns View The lever arm has a lifetime warranty, and the whole unit is rated to 900lbs. Check that your hardware is snug after the first few sessions.
The belt comes free with every Mammoth. It's padded so it doesn't dig into your hips, and it has 3 sets of D-rings on each side for a small, medium, or large fit. It's covered by a 1-year warranty, and plenty of owners use it for weighted dips too.
Yes. It sits at an angle when it's down, and a spring-loaded lever locks it firmly in place. It's 17" tall, so you start every rep standing and set the weight back down when you're done.
Kickstand View You can, and plenty of people start there. Here's what you get with the Mammoth: a 900lb rating, a kickstand so you start standing, a long adjustable lever, a lifetime warranty on the arm, and a padded belt. It mounts and comes off in seconds. No lumber runs, no guessing if it'll hold.
The horn takes Olympic plates and gives you 14" of loadable space. Iron or thin plates fit the most weight and give your knees the most clearance. Thick bumpers work, but they fill the horn fast and can crowd your stance. Standard 1" plates won't fit.
No rack? The Wall-Mount Accessory turns any solid wall into a belt squat station. Mount it into studs, never just drywall.
Can't drill? Owners also run the Mammoth on squat stands and yokes, as long as the uprights have side holes in 5/8" or 1".
Wall-Mount Accessory View Lookalikes can copy the shape, not the lever. The Mammoth's 39" to 48.75" arm is what gets you up to about 90% felt load. You also get a lifetime warranty on the arm, a real support team behind it, and hundreds of owner reviews. Garage Gym Reviews named it the best budget belt squat for a reason.
At 32lbs, one person can handle it. Hold it in two spots when you lift it off so it doesn't flop to one side.
Want to skip that step entirely? The Swan Neck adds swivel mid-rep and lets the arm store vertically, and the Wall-Mount Accessory gives it a permanent home. Either way, it never has to come off.
Competition bumper plates are made to IWF standards with tighter weight tolerances (±0.05%), a steel center hub, and low bounce. Standard bumpers are more affordable but less accurate, less durable, and typically have a higher bounce.
Yes—especially if you're serious about Olympic lifting, want long-term durability, or train with precise programming. They’re more accurate, last longer, protect your equipment better, and give you a true competition feel.
Absolutely. Their dead-blow bounce makes them ideal for tight spaces, and the steel hub minimizes wear on your barbell sleeves, making them perfect for home gym lifters who want pro-level gear.
Yes. From 10kg to 25kg, all plates share the same 450mm diameter. This ensures consistent pull height for lifts and protects lighter plates from edge damage during drops.
Yes—competition plates have a 50.4mm collar opening, designed to fit all standard Olympic barbells with a 50mm sleeve. They fit snugly to reduce plate movement during lifts.
Orders over 500lbs, full sixed racks, or oversized equipment will be flagged as freight at checkout and ship on an LTL (less-than-truckload) carrier with a scheduled delivery appointment.
Click here for more on freight shipping & delivery details.
Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/
