The Dane (DROPPING MAY 30TH) (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)
The Dane (7652636950575)

The Dane (DROPPING MAY 30TH)

$2,499 Regular price
/
Free Shipping To Lower 48 States
Delivered by , to your door
if ordered within hours and minutes
Not Shipping to ?

Color
  • In stock, ready to ship
  • Inventory on the way

Key Features


  • Half rack functional trainer with commercial grade pulley system
  • Dual 160lb weight stacks with a 1:1 pulley ratio, so 100lbs feels like 100lbs
  • The light and smooth trolleys have nylon rollers with upgraded ball bearings for a smooth glide along the upright
  • The pulley system is highly adjustable, allowing you to customize the angle, range of motion, and resistance for each exercise
  • With a length of only 60” from front to back, The Dane is extremely space efficient for all the functionality it brings to the table
  • Spotter arms, upgraded sandwich j-cups, a pair of D-handles, and a landmine attachment all included at no additional cost
  • Lifetime warranty on the squat rack & 5 year warranty on the pulley system

THE DANE

The Dane features a half rack in the front with a commercial grade functional trainer built into the rack. The combination of squat rack & functional trainer in one provides a smaller footprint (and lower price point) than two stand alone units. With a length of only 60” from front to back, The Dane is extremely space efficient for all the functionality it brings to the table. The squat rack is sturdy, commercial grade, and includes a pair of low-profile spotter arms for performing squats outside the rack. The pulley system is also highly adjustable, allowing you to customize the angle, range of motion, and resistance for each exercise. 

COMMERCIAL GRADE PULLEY SYSTEM

The Dane features dual 160lb weight stacks with a 1:1 pulley ratio, so 100lbs feels like 100lbs. The key benefit of a 1:1 pulley ratio compared to a 2:1 pulley ratio is that you get the same resistance with half the weight on the weight stack. So, it takes up less space but can still provide the same amount of resistance. The increased access to resistance also makes it less likely that you'll outgrow the weight stack and need to spend more money on additional weights down the road.

The pulley cables reach 53" outside the rack and operate on a 180 degree swivel, giving you plenty of room for cable work outside the rack. With a height of 93", The Dane provides plenty of reach for high & low cable positions, like lat pull-downs and low rows.

The trolleys have nylon rollers with upgraded ball bearings that allow them to easily glide up and down the upright, even with just 1 hand.

THE RACK

Don't let the pulley system steal the show, the rack portion of The Dane is just as enticing. Made from 11-gauge steel, The Dane features a commercial grade squat rack with a 1,200lb weight capacity. The uprights are 3" X 3" with 1" holes.

The Dane comes with a pair of extension feet which increase the stability at the base of the rack while squatting. It also includes a pair of low-profile spotter arms for squatting outside the rack. The upgraded sandwich j-cups have a thick lining of UHMW plastic so there's never steel on steel contact with your barbell.

Both the inside and the outside of each upright is sprayed with a thorough layer of high-quality powder-coat, making it extremely rust resistant, especially in more humid climates.

What comes included?

Each Dane comes with a pair of extension feet which increase the stability at the base of the rack while squatting. It also includes a pair of low-profile spotter arms for squatting outside the rack. The upgraded sandwich j-cups have a thick lining of UHMW plastic so there's never steel on steel contact with your barbell.

ADDITIONAL ATTACHMENT UPGRADES

Below are the attachment upgrade options:

  • Honeycomb Pegboard: $149
  • Dumbbell Storage Shelf: $149
  • Wall ball Storage Shelf: $149
  • Bumper Plate Toaster Storage: $149
  • Multi-Grip Pull Up Bar: $129
  • Low Row Foot Plate: $119
  • Lat Pulldown Seat: $199

Materials and Finish

11-guage steel with a powder coat finish

Weight Stacks

Dual 160lb weight stacks with a 1:1 pulley ratio

Rack Weight Capacity

1,200lbs

Extra Accessories

Low profile spotter arms, upgraded sandwich j-cups, a pair of D-handles, and a landmine attachment are all included with the rack at no additional cost

Dimensions

60" X 47" X 93"

Uprights & Hole Sizing

3" X 3" uprights with 1" holes

Warranty

Lifetime warranty on the squat rack & 5 year warranty on the pulley system

Product ID

Dual 160lb Weight Stacks

The Dane features dual 160lb weight stacks with a 1:1 pulley ratio. Both weight stacks are adjustable from 10lb - 160lbs in 10lb increments. With a 1:1 pulley ratio, the pulley cables reach 5+ feet outside the rack and move on a 180 degree swivel, giving you plenty of room for cable work outside the rack.

Commercial Grade Squat Rack

Along with the functional trainer, The Dane also features a commercial grade squat rack in the front. Every Dane includes a pair of low-profile spotter arms for squatting outside of the rack and a pair of extension feet for extra stability at the base of the rack while squatting. 

Additional Accessories

The Dane includes upgraded sandwich J-cups, extension feet, spotter arms, a pair of D-handles, and a landmine attachment at no additional cost!


THE DREAM SQUAT RACK FOR EVERY HOME GYM

Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/

You may also like


Recently viewed