Frequently Bought Together
+
+
Total Price:
+
+
💬 Ask Gymbo the AI
Frequently Bought Together
+
+
Total Price:
Now Back to the Actual Cage at Hand
You may be familiar with our Garage Series Squat Rack w/ Pullup Bar and now we've added a Squat Cage to the roster.
Now this Squat Cage is Garage Series for a reason. If you are a lifting over 700lbs, that's awesome but I would recommend our Commercial Power Cage over this one.
Never Just a Rat in a Cage!
You'll never feel like just rat in a cage with our Garage Series power rack. In fact, you might feel like you've walked into the Thunderdome instead and that your barbell has become an oversized war hammer.
This freestanding power rack boasts our trademark durability, ruggedness and sturdiness. Once you step inside this power rack moonlighting as a construction elevator, you'll give yourself a lift, and go right to the top of your game.
- A pair of UHMW-lined J-Cups that can be used in the front or back of either side of the uprights. The UHMW will protect your barbell throughout all your workouts.(Metric #4 Allen wrench to replace UHMW). Jcups themselves hold up the 700#.
- Weight Horns on either side of the cage. Conveniently store your weights so they're ready to use. They boast 13" of loadable space. Bonus, the weight will add extra stability to this already sturdy rack.
- Adjustable Safety Spotter Arms give you peace of mind if you want to lift heavy during a solo personal best.
- The uprights are 2" x 2" with 1" holes and numbered so it's easier to align accessories.
- Two different diameter pull-up bars - one standard 1.25" and one "fat" 2" diameter.
- The footprint on this cage is roughly 4ft by 4ft - great for smaller spaces.
Dimensions
44" X 48.5" X 83"
Material & Finish
16-Gauge steel with a matte black powder coat finish
Weight
115lbs
Weight Capacity
600lbs
Hole Size
1"
Upright Size
2" X 2"
Warranty
1 Year Warranty
Product ID
4369
YOU'RE WONDERING.
WE GOT YOU.
The Mammoth works out of the box with the lever arm and the belt, which comes free. That said, most owners add the Kickstand. It holds the arm up so you start every rep standing instead of picking the weight up off the floor.
That's why we sell it bundled. Pick + Kickstand & Magpin, or go all in with + Kickstand, Dual Mounted Weight Horns & Magpin. Bundling at checkout costs a lot less than adding the pieces later.
We'll be straight with you. Every lever arm moves in an arc, so you feel less than the full weight of the plates loaded. The fix is length, and the Mammoth's lever runs 39" to 48.75", one of the longest you can buy. A longer lever means a flatter arc and less forward pull.
In our recommended setup you feel about 80% of the load, and up to about 90% with the horn moved closer to you. Most lever belt squats top out around 60%. A standalone machine costs $2,000+ and eats floor space. The Mammoth hangs on your rack. See the full felt load breakdown.
Yes, and watch it before you start. It covers the belt squat and the kickstand. The bolts are big, so have a large wrench or socket set handy.
One tip owners have flagged: don't skip the big washer that goes under the weight horn.
It fits 2x2, 2x3, and 3x3 uprights with either 5/8" or 1" holes. Just pick your hole size at checkout. The one thing to check is that your upright has holes on the side, since that's where the Mammoth mounts.
No side holes? The Wall-Mount Accessory gives you a dedicated belt squat station without tying up your rack. And if it still doesn't work out, you're covered by our 365-day no-drama returns.
Wall-Mount Accessory View Yes. The arm has about 10" of length adjustment, the horn moves, and you can mount it at different heights on your rack. Mount height matters most, especially for shorter lifters who need to clear the kickstand. Our mount height guide walks you through it.
Sharing with someone a lot taller or shorter than you? Dial in a setup for each of you, then switch mount height and arm length between users.
The Mammoth is rated to 900lbs, so the frame isn't your limit. Plate space on a single horn is. Add the Dual Mounted Weight Horns for more room, and they double as handles mid-rep.
Worth knowing: dual horns sit farther back, so felt load drops to about 65%. That's great for big numbers, but run the math before you chase a plate count.
Dual Mounted Weight Horns View The lever arm has a lifetime warranty, and the whole unit is rated to 900lbs. Check that your hardware is snug after the first few sessions.
The belt comes free with every Mammoth. It's padded so it doesn't dig into your hips, and it has 3 sets of D-rings on each side for a small, medium, or large fit. It's covered by a 1-year warranty, and plenty of owners use it for weighted dips too.
Yes. It sits at an angle when it's down, and a spring-loaded lever locks it firmly in place. It's 17" tall, so you start every rep standing and set the weight back down when you're done.
Kickstand View You can, and plenty of people start there. Here's what you get with the Mammoth: a 900lb rating, a kickstand so you start standing, a long adjustable lever, a lifetime warranty on the arm, and a padded belt. It mounts and comes off in seconds. No lumber runs, no guessing if it'll hold.
The horn takes Olympic plates and gives you 14" of loadable space. Iron or thin plates fit the most weight and give your knees the most clearance. Thick bumpers work, but they fill the horn fast and can crowd your stance. Standard 1" plates won't fit.
No rack? The Wall-Mount Accessory turns any solid wall into a belt squat station. Mount it into studs, never just drywall.
Can't drill? Owners also run the Mammoth on squat stands and yokes, as long as the uprights have side holes in 5/8" or 1".
Wall-Mount Accessory View Lookalikes can copy the shape, not the lever. The Mammoth's 39" to 48.75" arm is what gets you up to about 90% felt load. You also get a lifetime warranty on the arm, a real support team behind it, and hundreds of owner reviews. Garage Gym Reviews named it the best budget belt squat for a reason.
At 32lbs, one person can handle it. Hold it in two spots when you lift it off so it doesn't flop to one side.
Want to skip that step entirely? The Swan Neck adds swivel mid-rep and lets the arm store vertically, and the Wall-Mount Accessory gives it a permanent home. Either way, it never has to come off.
Unfortunately, no. The uprights on this cage are 2 x 2 and the 2x3 would be too big.
Here are a few of the Key Features you'll love when you buy this squat cage.
Cage Advice
Our solid Garage Series power rack serves functional fitness users, lifters and builders equally well with a small footprint (44" wide x 48.5" deep). With its small footprint, this power rack will work well in compact spaces.
Want Some Accessories?
We've got you covered. You asked for it - and we made some of the accessories you were demanding for the cage!
Want some extra j-cups? You can find them right here and add extra safety to your cage!
Do you want to do the dip? This dip station is the perfect size for the cage and will let you work your upper body easily!
Safety first is key! And that's why these safety spotter arms are perfect for this garage cage!
Wanna store those bumpers away from your toes? These weight storage posts are the perfect answer to a clean gym and safe tootsies!
Assembly Instructions:
Here are assembly instructions for the cage!https://cdn.shopify.com/s/files/1/0049/4272/files/1801-Rack-FS-Garage_CageE_A_Ee.pdf?v=1666206500https://cdn.shopify.com/s/files/1/0049/4272/files/1801-Rack-FS-Garage_CageE_A_Ee.pdf?v=1666206500
Required By California Law - WARNING: This product may have materials, which are known to the State Of California, that can cause Cancer and Reproductive Harm. For more information, California Prop 65: https://www.p65warnings.ca.gov/
